- Water-Based Press Wash
- Hyper Haze 2 N 1 Degreaser and Dehazer
- Emulsion Remover
- Premium Hand Cleaner
- Scrub Pad
- Spray Nozzles

Ecotex® Screen Printing Water-Based Chemistry Kit by Screen Print Direct® is an essential kit for water-based ink screen printing. Easy to use and the perfect kit to help get you started. Ecotex® screen reclaiming kit is the perfect kit with everything you need when it comes to reclaiming screens. Cleaning screen printing screens has never been easier with water-based ink cleaners and emulsion remover. Our kit includes 1 pint of Water-Based Press Wash, 1 pint of Hyper Haze, 1 pint of Emulsion Remover, 4 oz. of Premium Hand Cleaner for silk screen cleaner, and 2 spray nozzles.

Ecotex® Water-Based Press Wash
Citrus Based environmentally friendly Screen Wash / Press Wash. Use it at the sink or on the press, designed specifically to quickly dissolve Water-Based inks. This product is ready to use, emulsion, and capillary stencil safe.

- Ecotex® Hyper Haze
Economically and safely remove stains from all types of mesh better than other hazardous paste stain removers. Contains proprietary mesh protectors and micro-particles that will prepare new mesh for production.
To learn more about this product check out our blog post - To Degrease or Not Degrease

Ecotex® Screen Printing Emulsion Remover
This product is ready to use or it can be diluted 1:4 with water. Ecotex® Emulsion Remover will economically and safely remove all types of photopolymer, diazo, and capillary film emulsions without etching. Reclaiming emulsion is easy.

Ecotex® Premium Hand Cleaner
Inks, Grease, & Much More are no match for our hand cleaner. Our organic-based, non-toxic hand cleaner was designed to be used with or without water. This product does not leave your hands dry or with an annoying sticky film after using it.

For best results follow the steps below:
1. Start by using Ap 2-in-1 to degrease and clean any contaminants from the mesh.
2. When finished printing card excess ink away and use press wash to clean the ink off the screen.
3. To reclaim your screen spray Emulsion Remover to both sides of your screen and it will strip off once rinsed with high-pressure water.

Disclaimer: Do not let emulsion remover sit on the screen for more than 30 seconds or it can lock emulsion on the mesh.

Quick Tip:
For more information regarding each specific product please refer to the individual product listing

Visit for more information: https://screenprintdirect.com/collections/bundles/products/ecotex-screen-printing-water-based-chemistry-kit

Includes:

Ecotex Water-based Press Wash
Ecotex Hyper Haze 2-N-1 Screen Printing Degreaser/Dehazer
Ecotex Emulsion Remover
Ecotex Super Tack
Spray Nozzles
Ecotex® Screen Printing Complete Water-Chemistry Kit by Screen Print Direct® is an essential screen reclaiming kit for water-based ink screen printing. This complete kit has every chemical you to print from start to finish. Cleaning screen printing screens has never been easier with water-based ink cleaners and emulsion remover.

Ecotex® Screen Printing Water-based Press Wash

Citrus Based environmentally friendly Press Wash. Use it at the sink or on the press, designed specifically to dissolve plastisol and UV inks quickly. This product is ready-to-use, emulsion, and capillary stencil safe.

Ecotex® Hyper Haze Screen Printing Degreaser/Dehazer

Economically and safely remove stains from all types of mesh better than other hazardous paste stain removers. Contains proprietary mesh protectors and micro-particles that will prepare new mesh for production.

To learn more about this product check out our blog post - To Degrease or Not Degrease

Ecotex® Screen Printing Emulsion Remover

This product is ready to use or it can be diluted 1:4 with water. Ecotex® emulsion remover will economically and safely remove all types of photopolymer, diazo, and capillary film emulsions without etching. Reclaiming emulsion is easy, try our Ecotex® emulsion remover today.

Disclaimer: Do not let the emulsion remover sit on the screen for more than 30 seconds or it can lock the emulsion on the mesh.



Ecotex® Super Tack

Ecotex® Super Tack Screen Printing Pallet Adhesive by Screen Print Direct® is an eco-friendly solution to screen printing adhesive spray. This water-based pallet adhesive is designed to not leave residue and create a secure nonpermanent bond. Super Tack is heat resistant and will remain tacky under high heat. Eliminate overspray and replace conventional solvent-based aerosol spray mist.
Visit us more Information: https://screenprintdirect.com/collections/bundles/products/ecotex-complete-water-based-chemistry-kit

Cures at 320°F
PVC-free and phthalate-free
Made with plant-based plasticizers
Vegan and environmentally friendly
Vibrant white color with opaque coverage
Suitable for use with cotton, cotton/polyester blends, and most synthetics
Compatible with cold peel transfers
This eco-friendly ink by Screen Print Direct® is more readily biodegradable than conventional plastisol inks, making it an environmentally conscious choice. It prevents screen drying issues, unlike traditional plastisol inks. The absence of PVC is crucial as it is the most environmentally damaging plastic, releasing toxic chemicals into the environment. The ink's curing guidelines are provided, emphasizing the importance of proper curing for longevity. Additionally, cleanup is easy with Ecotex® Plastisol Press Wash/Ink Degradant on the press and Ecotex® Plastisol Screen Wash/Ink Degradant in the sink. Pro tips include storing the ink at room temperature and avoiding prolonged exposure to temperatures above 90º F (32º C).

Visit for more information: https://screenprintdirect.com/collections/plastisol-inks-for-screen-printing/products/ecotex-white-plant-based-screen-printing-plastisol-ink

Cures at 320°F
PVC-free and phthalate-free
Made with plant-based plasticizers
Vegan and environmentally friendly
Vibrant white color with opaque coverage
Suitable for use with cotton, cotton/polyester blends, and most synthetics
Compatible with cold peel transfers
This eco-friendly ink by Screen Print Direct® is more readily biodegradable than conventional plastisol inks, making it an environmentally conscious choice. It prevents screen drying issues, unlike traditional plastisol inks. The absence of PVC is crucial as it is the most environmentally damaging plastic, releasing toxic chemicals into the environment. The ink's curing guidelines are provided, emphasizing the importance of proper curing for longevity. Additionally, cleanup is easy with Ecotex® Plastisol Press Wash/Ink Degradant on the press and Ecotex® Plastisol Screen Wash/Ink Degradant in the sink. Pro tips include storing the ink at room temperature and avoiding prolonged exposure to temperatures above 90º F (32º C).

Visit for more information: https://screenprintdirect.com/collections/plastisol-inks-for-screen-printing/products/ecotex-white-plant-based-screen-printing-plastisol-ink

Key Benefits:
-Extends Life of The Print
-Extends Washability
-Ease of Use
-Versatile - Can Also Be Used For Foils

Ecotex® Screen Printing Plastisol Transfer
Powder by Screen Print Direct® is a bonding powder used to heat transfer ink. By using transfer powder on your plastisol ink, you can guarantee a smoother transfer of ink onto desired material. While you can transfer ink without transfer powder, the powder extends the life of the print and washability. Transfer powder can also be used for foil transfers. It creates a secure and long-lasting bond between garment and foil.

-Run transfer paper through dyer to preshrink the sheet before using it on your press.

-Burn your image backwards because once you get to heat pressing the image onto your garment, the image will flip once again.

-Use about 1/8 inch off contact.

-If you are doing a multiple color print use a quick flash be careful not shrink the paper more before printing your next color

-Once you are done printing you have to slightly cure your image but leave the image slight wet for the adhesion powder to have something to stick to.

-Place powder into a bucket. Don't worry about over filling. Excess powder can be reused

-Use gloves to dip the transfer paper into the bucket cover the entire printed area with the powder

-Run the powdered print through the drier to gel the ink. If you are using Rapid Cure ink, which cures at 270F, run it through the drier at 200F. Gel the ink, do not fully cure.

-Put excess powder back into the container.

Warning: Do not leave the powder out, moisture in the air will ruin it.

Shop Now: https://screenprintdirect.com/collections/screen-printing-accessories/products/ecotex-screen-printing-plastisol-transfer-powder

Screen Printing Ink Mixing Container – If you're tired of ruining your Tupperware, this is the perfect solution. Create custom ink colors, mix discharge powder, and more.

Great add-on if you are mixing custom colors with our Rapid Cure Color Mixing System or our Ecotex Water-based Color Mixing System.

Vapor lock container (not a screw-on) slightly milky - Includes lid.

Sizes:

16 oz. - Pint
32 oz. - Quart

Key Benefits:

Ready To Use or Discharge (See ink specs for more details)
Super Soft Hand Feel
Eco-friendly: PVC & Phthalate Free
Bright & Crisp Color
High Opacity
Low Odor
Iron Resistant
Color Mixing System Inks
Cures at 320°
Ecotex® Water Based Screen Printing Ink Reflex Blue by Screen Print Direct® is ready to use straight from the container! They can also be used as discharge ink by simply mixing in Discharge Activator (sold separately). The inks are bright, vivid, and can be mixed together to create all colors in the Pantone book. By using Ecotex® Water-based Inks, you'll be able to print on high mesh counts that will produce high image detail.

For Ecotex Water-Based Ink Hex Codes and Digital Swatches Click here

For more information on water-based inks follow along in our - Water-Based Printing blog.

Click Here to create 1000s of colors from the Pantone book. Our Color Mixing System is FREE and easy to use alongside our water-based inks.



Mesh Guidelines: 155-305

Flash and Curing Guidelines:

Curing should be a minimum of 90 seconds at 320°F. For the best results 2-3 minutes at 320°F.
Flash at 105°C/220°F - 7 - 12 seconds
Recommended Clean Up:

On the press/in the sink - Ecotex® Water Based Screen Printing Press Wash
For Optimal Use:

Activate just enough ink for the job at hand
Mist the screen with water during high volume runs to prevent the ink from drying out
Mixing Information:

Water based printing: Our ink can be used straight out of the bottle as a traditional water-based ink. We recommend only doing this technique on light color garments.
Discharge Printing: This ink can also be used a discharge ink by adding the discharge powder. When using as a discharge ink, add enough discharge powder to the amount of ink you need for the print run. This will be somewhere in between 3-5% by weight. Mix thoroughly to make sure no chunks or grains are visible. Once the powder is added to the ink it will last for 8 hours.
Emulsion Recommendations: We recommend using a water resistant emulsion such as Water Resistant Blue Emulsion or Dual Cure Pink Emulsion, both require mixing diazo. Remember to degrease your screen before coating emulsion, Hyper Haze will degrease and remove stains/ghosts.

CMS-Color Mixing System: Our Color Mixing System is designed, so you can create any color you want in the pantone system with just 14 colors. If you’re interested in trying out all 14 colors, you can access our color kit and try the whole thing out instead of just one color. Best of all our mixing system is FREE! Click here or message us directly to gain access to our color mixing software.

General Testing: Before you do any large print, we recommend doing a stretch and a wash test to ensure you cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers; best results will be seen on 100% cotton. Synthetic fibers will not discharge properly.

Color Matching Info: Some colors do not discharge as well as others ex. are red, blue & purples. Color matching may not be exact. Roughly 90% of our colors match, matches cannot be guaranteed due to the differences in how fabrics are dyed.

Click here to download the technical data sheet for Ecotex® Water-based Screen Printing Ink:
https://screenprintdirect.com/collections/water-based-screen-printing-ink/products/ecotex-water-based-ink-reflex-blue

Ready to take your prints to the next level? Add special effects to your arsenal of services and wow your customers with these new techniques. This kit includes 5 of our best-selling special effect additives in 8-ounce containers. Test, perfect and play with these new inks before adding them as a new offering to your customers.
Kit Includes
Puff Additive
High-Density Additive
Stretch Additive
Glow Ink
Foil Adhesive
Rapid Cure Screen Printing Puff Additive by Screen Print Direct® is a low-temperature cure plastisol ink additive formulated to give your ink an elevated puff texture. Rapid Cure Puff Additive is ready to use from the container, mix the additive into the ink of your choice.

The puffing effect occurs once the ink is fully cured on your garment.

We highly recommend using Rapid Cure Puff Ink with low-temperature ink. Results with a standard plastisol ink are subpar.

Rapid Cure Screen Printing High Density (HD) Additive by Screen Print Direct® is a low-temperature cure plastisol ink additive formulated to give your ink a thick 3-dimensional deposit. This high-density additive must be paired with a thick stencil to achieve a 3-dimensional look. Ecotex® Tex Red HV and Ecotex® Tex Blue HV are both high-viscosity emulsions that create a nice thick stencil. Rapid Cure High Density (HD) Additive is great for creating a dramatic raised look while keeping edges sharp in your art detail.

High-Density additive is not an expansive additive like puff additive. This additive is meant to make the ink buildable within a thick stencil. Multiple layers of ink are required in order to achieve desired results.

This ink can be used with low temp cure inks or with standard plastisol inks.
Rapid Cure Stretch Additive by Screen Print Direct is a low-temperature cure additive that will allow ink to cure seamlessly on garments without cracking. Our super stretch additive is perfect for screen printing athletic apparel. Customize athletic wear, leggings, and more with just one simple additive. Simply add 10-15% by weight of the additive to the ink of your choice. We highly recommend our Rapid Cure plastisol ink collection.
Rapid Cure Glow In The Dark Screen Printing Plastisol Ink by Screen Print Direct® is a premium plastisol ink that cures as low as 270°. Rapid Cure Plastisol Ink is the best plastisol ink for screen printing when working with a variety of materials. This low-bleed glow-in-the-dark ink works great with a wide variety of blends including polyester. Say goodbye to garment shrinking and scorching with low-temperature cure fabric ink. The ink's lower cure temp saves production time and helps ensure the garment is cured properly without expensive conveyor dryers. The ink's texture is creamy and short-bodied. The color is vibrant, bold, and opaque. For darker garments, we recommend printing with an under-base.
Rapid Cure Screen Printing Foil Adhesive by Screen Print Direct® is a clear plastisol adhesive created to adhere foil to textiles. This screen printing adhesive can be printed directly onto fabric or onto the foil and used as a transfer. Rapid Cure Screen Printing Foil Adhesive can be used on cotton and poly blends, dark or light, straight from the container.

Disclaimer: All colors are approximate and will vary from monitor to monitor.
For more information on low-temperature cure, inks take a look at the blogs we have below.

General Information:

For more information specific to the item in the kit, visit the individual listing for the product. Links have been provided above in each description.

Curing:

Cure at 132° C/270° F
Flash at 82-104° C/180-200°F
Flash and Curing Guidelines: Generally it will take 5-10 washes to fully test the cure, but if the ink is seriously under-cured, the print will show deterioration after only 1-3 washings washes. Another way to test your print quickly is doing the “Stretch Test” stretch the print roughly 2/3 of the T-Shirt; if the print cracks and does not retract back it means you under-cured.

General Testing: Before you do any large print, we recommend doing a stretch test and a wash test to ensure you cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers best results will be seen on 100% cotton.

Clean-Up:

On the press - Ecotex® Screen Printing Plastisol Press Wash/Ink Degradant
In the sink - Ecotex® Screen Printing Plastisol Screen Wash/Ink Degradant
✔️Pro Tips: Plastisol inks do not dye fabric like traditional inks. Plastisol inks wrap around the fibers and make a mechanical bond with the fabric. Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it's still in the container.

We highly recommend printing with an under-base white when printing on a dark garment

Description

Key Benefits:

*Cures At 320° F
*PVC Free
*Made with Plant-Based Plasticizers
*Phthalate Free
*Vegan
*Vibrant White Color
*Opaque Coverage
*For use with cottons, cotton/polyester blends and most synthetics
*Can be used with cold peel transfers
Ecotex® Plant Based Plastisol Ink by Screen Print Direct® is an eco friendly ink made from plant-based plasticizer. Unlike most plastisol inks, Ecotex® Plant Based Ink is free of PVC and all phthalates. Our ink is also more readily biodegradable than conventional plastisol inks. Produce bold and vibrant prints with our clean vegan formula. Made with you and the environment in mind, eco-friendly printing is now possible. Create without compromise.

Ecotex PVC Free Plastisol Ink will not dry in the screen, causing choking problems.
Why is PVC Free important? PVC is the most environmentally damaging plastic. The use and disposal of PVC results in the release of toxic, chlorine-based chemicals. These toxins build up in the water, air, and food chain.

Disclaimer: All colors are approximate and will vary from monitor to monitor.

If you need tips and tricks on white plastisol visit our blog - White Plastisol Ink if you need help preparing to print with plastisol ink visit our blog - Plastisol Ink Prep

We highly recommend print flash print when printing white onto a dark garment.

Curing:

Cure at 160° C/320° F
Flash at 105° C/220°F
Flash and Curing Guidelines: Generally it will take 5-10 washes to test the cure fully, but if the ink is seriously under-cured, the print will show deterioration after only 1-3 washings washes. Another way to test your print quickly is doing the “Stretch Test” stretch the print roughly 2/3 of the T-Shirt; if the print cracks and does not retract back it means you under-cured.

General Testing: Before you do any large print, we recommend doing a stretch test and a wash test to ensure you are cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers best results will be seen on 100% cotton.

Clean-Up:

On the press: Ecotex® Plastisol Press Wash/Ink Degradant
In the sink: Ecotex® Plastisol Screen Wash/Ink Degradant
✔Pro Tips: Plastisol inks do not dye fabric like traditional inks. Plastisol inks wrap around the fibers and make a mechanical bond with the fabric. Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it's still in the container.

Shop Now- https://screenprintdirect.com/collections/plastisol-inks-for-screen-printing

Key Benefits:-
1. 100% Non-Stick
2. Ultra-Thick
3. High Temperature Resistant
4. PFOA Free
5. FDA Approved
6. Protect your heat press and substrates with our ultra-thick, high temp resistant Teflon Paper. This paper is more sturdy than other papers on the market. The smooth and glossy surface creates perfect presses each time without adding crinkle lines to your art. When doing heat press transfers, our non-stick sheet is placed between the top heat platen and the image transfer, vinyl, or rhinestones. This listing includes 3 - 16"x20" sheets.
Technical Details:
# Operation Temperature: -76°F to 500°F (-60°C to 260°C)
# Product: PTFE Coated Fiber Glass
# Color: Brown
# Coating: Polytetrafluoroethylene (PTFE)
# PFTE Content: 53%
# Total Thickness: 0.13 millimeters +/- 0.01 millimeters

Shop Now- https://screenprintdirect.com/collections/new-arrivals/products/teflon-paper-3-pack?